Timber Doors
All our Timber Doors include the following features:
- Standard Door sizes are 1980mm x 710, 760, 810, 860
- Door Styles are ex 125mm wide.
- All Doors are 42mm thick.
- All Doors are glazed to NZ standards.
- Delivery within the Wellington area can be arranged.
- All Joinery is constructed using NZ standard joinery profiles.
- Other styles and sizes not shown, can be, made to order.
- A deposit is required to confirm order.
- All Joinery is guaranteed to be free from defects in workmanship for
5 years.
- 10-15 Working days to manufacture depending on the size of the order
and the current factory workload
Click on the images below to see a larger version.
Joinery Effects is a
member of the Master joiners Federation
Timber Joinery is often what sets apart one building from
another.
It is an area of highly specialized craftsmanship. It is
therefore important that you take your time in selecting who
manufactures and advises on care and maintenance. You need to be certain
that they are professionals who work to international standards and
guarantee the quality of their work.
Registered Master Joiners provide this certainty.
Registered Master Joiners can provide full consultation
and design services for all your joinery needs or work closely with
other design professionals to ensure that the finished product looks and
functions at its best for years and years.
Registered Master Joiners ensure high standards of
craftsmanship and guarantee the warranty required under the Consumer
Guarantee Act.
Inaugurated in 1950, NZJMF has registered Master Joiners
throughout New Zealand who are committed to providing professional
standards of service and workmanship in the field of joinery and Kitchen
manufacture.
Exterior Timber Joinery Care and Protection
Exterior timber joinery is a premium product, which requires a level of protection to enhance the properties of the product. It is recognised exterior timber joinery is not 100% wind and rain proof , it is constructed for sheltered exterior use and should not be exposed to driving rain , direct sunlight or extremes of humidity. In locations where extreme weather conditions are found, additional installation precautions maybe taken to improve the products performance, such as the installation of seals, which are not considered normal trade practice.
The minimum protection for timber joinery is as follows:
- All Joinery items must be sealed on all 6 faces prior to installation including hardware penetration.
- Oil based systems only to be used, following the coating manufacturer's instructions and advice.
- 4 Coat system being one primer coat one undercoat and two topcoats.
- The bottom and top of the sashes and doors must be sealed.
- When painting the putty, the paint must overlap the glass by at least 2mm.
- Appropriate flashings must be installed.
- Joinery with wet plaster must have at least two protection coatings prior to plastering.
- Dark colours void any Guarantee.
- Timber joinery must be installed by a qualified builder.
If you choose to ignore these recommendations the warranty is void.
Glazing
- Use neutral cure sealants only.
- No tinted putty to be used for exterior use.
- Timber glass beads should be fitted using non ferrous fittings.
- No glass to be installed unless rebates have been primed and sealed.
Shrinkage and or expansion does occur from seasonal changes in temperature and moisture. Minor warping or twisting up to 6mm is expected as normal for timber joinery. Variations in colour, texture or grain of timbers are a natural occurrence for which the manufacturer can not control and are not considered defects but part of the natural beauty of timber.
|
